Does the office need a laser all in one? If so, the Kyocera Mita CS-1820 is definitely worth consideration. With a size of 19.5x16.6x15.2 inches, any office will be able to find a spot for it easily. The weight of 32 pounds is reasonable considering there are four machines all working inside one unit. Able to produce a maximum monthly volume of 15,000 pages, it will be best suited for small offices. Setup should be simple and the warm-up time for the CS-1820 is only 20 seconds. The first page out when printing will be produced in 8 seconds, while a copy will take slightly more time at 9.5 seconds.
It is a monochrome laser printer, which means only black-and-white documents can be produced. Because of this, only one Kyocera Mita CS-1820 toner cartridge is needed, and it is filled with only black printer toner. The Kyocera Mita CS-1820 toner should last about 7,200 pages before needing replaced, which means if the unit is used to its full capacity every month buyers should only need to replace the printer toner twice.
As far as speeds go, there are faster products out on the market. Only able to produce 18 pages per minute using the needed Kyocera Mita CS-1820 toner cartridge, many will find that it will slow down productivity. However, when the scanning portion is used, it is more than efficient. With a 33.6 Kbps transmission speed, it will take around 3 seconds for each fax to be sent and received—however, depending on where it is going or where it came from that time may vary.
Resolutions of 2400x600 dpi can be reached when printing or copying, and bond paper, transparencies, envelopes and recycled paper are all supported. Remanufactured toners for this printer are available for those who want to save money!
Based on our 100% Satisfaction Guarantee, Ink Technologies will accept returns of compatible or remanufactured ink and toner cartridges for full credit if the returned product has a valid return authorization number and is received in our warehouse within 6 months of the original shipping date. If there is a confirmed print quality issue, only 1 set of opened products will be accepted for credit returns, and only if less than 30% of the ink or toner has been used.
Ink Technologies will replace defective compatible or remanufactured products free of charge if the products are returned within 1 year of the original ship date, and provide a return shipping tag for return of the product.