The Brother HL-2280DW can reach speeds of 27 pages per minute, and offers the sharp output quality of other models in its line, with the added bonus of copying and color scanning functions. It also includes an LCD screen for better feedback and control, and its duplexing and wireless networking are convenient for home and small office users alike.
Although the model shown differs slightly in appearance, the replacement process is the same.
Start by opening the front access panel by pulling it toward you from both sides. With the panel open, you can see the small handle on the drum and cartridge assembly. Pull it toward you to remove the entire assembly.
Set the assembly on some paper to protect the surface from spills, and remove the Brother HL-2280DW toner cartridge from the drum assembly. Press down on the small lever on the left side until the cartridge is released, then grasp it by the handle and remove it.
Open the box for your new HL-2280DW toner cartridge carefully, and take it out of the packing materials, which includes the plastic bag. Rock your new cartridge from side to side a few times so that the toner inside will be distributed evenly, then tilt and remove the plastic protective cover.
Inserting at an angle, place the Brother HL-2280DW cartridge into the drum assembly. It should snap down into place firmly. Once inserted, turn the assembly around to the back and clean the corona wire. Look for the small tab on the right side, and slide it back and forth several times to clean the wire inside, then lock it back into its starting position.
To finish the installation, insert the assembly into the printer firmly, then close the access panel.
You are now ready to resume printing with your Brother HL-2280DW printer.